Multicellular centrifuge submersible electropumps

4" series

TECHNICAL SPECIFICATIONS

•  Franklin electric motor (submersed rotor)
•  All M types are monophasic 220v, and are provided with a condenser
•  Triphasic modes are provided with either 220 or 380v.
•  Maximum starts in monophasic motors will be from 12 to 30 and in triphasic motors from 1.5c.v.
•  Stainless steel pump sleeve and shaft
•  Brass lifting and impulse body
•  Polycarbonate turbines and diffusers
•  Built-in retaining valve in all models
•  Maximal water temperature: 30ºC
•  Pumps must be protected against lack of water. It can not operate when empty
•  We recommend our model “hasa-85” and the drill probe controller for open wells
•  Maximal water temperature: 30ºC
•  Pumps must be protected against lack of water. It can not operate when empty
•  For open wells our model “hasa-85” and the drill probe controller are recommended

APPLICATIONS

  • Submersible pumps for 4”-diametre wells minimum and clean water. Appropriate for civil and industrial uses, irrigation, and general public supply.

Very important: the minimal distance between the pump and the bottom must be 30cm.

Do not use the pump with water containing more than 60gr/m3 sand.
Model 4"
C.V.
Exit Ø
Manometric head
Flow in L/H
III - 220 ó 380 v
II - 220 v
600
900
1200
1800
2100
2400
3000
3600
4800
5400
6000
8400
10800
16800
20400
24000
ST-3-16 SM-3-16 0,75 1¼" 75 70 65 49 39 29
ST-3-22 SM-3-22 1 1¼" 105 96 89 69 63 40
ST-3-32 SM-3-32 1,5 1¼" 147 139 127 99 79 58
ST-3-46 SM-3-46 2 1¼" 210 201 185 137 110 80
ST-6-7 SM-6-7 0,75 1¼" 42 41 39 38 36 34 30 20 12
ST-6-10 SM-6-10 1 1¼" 62 58 54 52 50 47 42 26 16
ST-6-15 SM-6-15 1,5 1¼" 88 86 82 79 76 69 61 39 26
ST-6-20 SM-6-20 2 1¼" 118 116 110 108 102 94 84 52 34
ST-6-30 SM-6-30 3 1¼" 177 174 165 159 154 142 124 78 49
ST-6-40 4 1¼" 236 229 220 214 206 187 163 102 68
ST-10-5 SM-10-5 0,75 2" 35 34 33 32 30 29 26 24 23 14 5
ST-10-7 SM-10-7 1 2" 46 45 44 42 41 40 36 34 31 20 8
ST-10-10 SM-10-10 1,5 2" 66 64 63 62 60 58 50 46 43 26 10
ST-10-13 SM-10-13 2 2" 85 84 82 80 77 74 66 62 58 36 20
ST-10-19 SM-10-19 3 2" 125 122 120 118 113 108 96 92 85 56 28
ST-10-24 4 2" 156 152 150 148 143 138 124 113 106 64 35
ST-10-32 5,5 2" 205 203 200 194 187 180 166 155 148 93 45
ST-14-8 SM-14-8 2 2" 55 54 53 51 49 47 40 29
ST-14-12 SM-14-12 3 2" 81 80 79 73 71 69 59 43
ST14-17 4 2" 114 113 111 105 101 96 83 57
ST-14-24 5,5 2" 160 157 154 146 140 135 115 77
ST-14-30 7,5 2" 202 198 193 182 175 168 135 91
ST-24-7 SM-24-7 2 2" 36 34 30 28 14 10 7
ST-24-10 SM-24-10 3 2" 51 48 44 40 18 13 8
ST-24-14 4 2" 65 63 58 53 24 16 11
ST-24-17 5,5 2" 92 90 83 75 34 23 15
ST-24-26 7,5 2" 138 128 117 105 65 41 19