Residual water submersible electropumps
Triturant series ( strengthened stainless steel )
TECHNICAL SPECIFICATIONS
- Submersible pumps
- Enclosed motor in oil bath
- IP-68 protection, F type insulation
- Stainless steel AISI 420 pump shaft
- Stainless steel AISI 304 screws
- Motor casing and cover, pump and turbine shaft made of G-25 grey cast iron
- Pump barrel mechanical closing device made of crystalon
- Oil chamber mechanical closing device made of graphite-ceramics
- Maximal water temperature: 60ºC
- Maximal pump depth 20m
- Pumped liquid PH from 6 to 11
- Provided with 10m. electric cable
APPLICATIONS
- Submersible electropumps suitable to pump small water amounts at a high static head
- Thanks to the waste pulper system these pumps are suitable to bail residual water in civil, industrial, agricultural and public health sectors.
WASTE PULPER CHARACTERISTICS
- It consists of a fixed part and a working part with 21 cutting edges. Both are made of strengthened stainless steel.
- The special waste pulper design along with the motor speed reach up to 60,000 grinding operations per minute.
WASTE PULPER
TRITURANT - 140 M
Model |
C.V. |
Current |
V
Tension |
Ø Exit |
Caudal en m³/h |
Manometric head |
||||||||||
4 |
6 |
10 |
12 |
14 |
16 |
18 |
20 |
24 |
30 |
32 |
||||||
| TRITURANT 120 M | 1,2 | monophasic | 230 | 1¼" | 12,6 | 9 | 6,5 | 5 | 2,9 | 1 | ||||||
| TRITURANT 120 T | 1,2 | triphasic | 230/400 | 1¼" | 12,6 | 9 | 6,5 | 5 | 2,9 | 1 | ||||||
| TRITURANT 150 M | 1,5 | monophasic | 230 | 1¼" | 16,2 | 15,5 | 11,5 | 9,4 | 6 | 3,6 | ||||||
| TRITURANT 150 T | 1,5 | triphasic | 230/400 | 1¼" | 16,2 | 15,5 | 11,5 | 9,4 | 6 | 3,6 | ||||||
| TRITURANT 200 M | 2 | monophasic | 230 | 1¼" | 16,2 | 15,5 | 14,4 | 12,6 | 10 | 7,9 | 5,4 | |||||
| TRITURANT 200 T | 2 | triphasic | 230/400 | 1¼" | 16,2 | 15,5 | 14,4 | 12,6 | 10 | 7,9 | 5,4 | |||||
| TRITURANT 300 T | 3 | triphasic | 230/400 | 1¼" | 16,2 | 15,9 | 15,5 | 15 | 14,4 | 13,3 | 10,5 | 5 | 2,9 | |||
| TRITURANT 400 T | 4 | triphasic | 230/400 | 2½" | 19 | 18,7 | 18 | 16,5 | 14,4 | 11,9 | 6,5 | |||||
| TRITURANT 550 T | 5,5 | triphasic | 230/400 | 2½" | 20 | 19,8 | 18,7 | 17,3 | 15,5 | 13 | 10 | 4,5 | ||||
Model |
C.V. |
Current |
V
Tension |
Ø Exit |
Caudal en m³/h |
Manometric head |
||||||||||
5 |
10 |
15 |
20 |
25 |
30 |
35 |
40 |
45 |
50 |
55 |
||||||
| TRITURANT 750 T | 7,5 | triphasic | 400/690 | 2½" | 28 | 26,7 | 25,2 | 23,4 | 21,3 | 19 | 14,4 | 9 | ||||
| TRITURANT 1000 T | 10 | triphasic | 400/690 | 2½" | 28,8 | 28,4 | 27,9 | 27,4 | 26,7 | 25,2 | 23,4 | 20,9 | 18 | 14,4 | 5,4 | |
| * Monophasic models with built-in start panel | ||||||||||||||||